vkannan
10-14 11:14 PM
Hi
I'm on h1 and also have an EAD
My current job is on my h1. And I have an EAD, but never used it.
Question: Can I work pat time on my EAD and still retain my h1.
Any pros and cons?
Thanks
Tejal
Dude, this is grey area, One thought is, Once EAD is used for 2nd job fulltime /parttime you lose your H1 status and there is other thought if you stay with your GC sponsoring employer and retain the full-time job you should be fine retaining your H1 status and ofcourse you can use EAD for your P/T job.
And hey this is not it there is one more thought going around, If your last entry is through H1b you still are in H1 status even after using EAD for your 2nd Job.
Fact of the matter, nobody is sure about which thought is correct.
I'm on h1 and also have an EAD
My current job is on my h1. And I have an EAD, but never used it.
Question: Can I work pat time on my EAD and still retain my h1.
Any pros and cons?
Thanks
Tejal
Dude, this is grey area, One thought is, Once EAD is used for 2nd job fulltime /parttime you lose your H1 status and there is other thought if you stay with your GC sponsoring employer and retain the full-time job you should be fine retaining your H1 status and ofcourse you can use EAD for your P/T job.
And hey this is not it there is one more thought going around, If your last entry is through H1b you still are in H1 status even after using EAD for your 2nd Job.
Fact of the matter, nobody is sure about which thought is correct.
talduk
March 27th, 2005, 01:28 AM
Thanks all for your kind assistance.
After consulting with another owner of a D-100 (which I accidently met on the street) it seems that the problem is indeed power source related.
I do a six normal batteries and when I replaced it all went well.
One more thing.
Do u guys know a 4gb memory cerd (Hitachi's). The camera display is different when I use this card and an original (much smaller) one.
When using the 4gb card I can't see the number of photos left. Is this normal?
Is the card infected with some virus? Or maybe I received some cheap used card ?
Thanks,
David.
After consulting with another owner of a D-100 (which I accidently met on the street) it seems that the problem is indeed power source related.
I do a six normal batteries and when I replaced it all went well.
One more thing.
Do u guys know a 4gb memory cerd (Hitachi's). The camera display is different when I use this card and an original (much smaller) one.
When using the 4gb card I can't see the number of photos left. Is this normal?
Is the card infected with some virus? Or maybe I received some cheap used card ?
Thanks,
David.
number30
10-26 08:14 PM
vacation or telecommuting for longer duration (not sure about max # of days) is considered as abandoning AOS.
You need not be here in US until the GC is approved. There is no abandoning if he has valid offer and some way of re-entry like valid AP or H1.
You need not be here in US until the GC is approved. There is no abandoning if he has valid offer and some way of re-entry like valid AP or H1.
lonedesi
04-04 10:08 PM
A friend of mine who has a bachelor's degree from India applied for her labor through PERM under EB2 category, which was approved. This was done based on the attorney's advice. Later, when the I-140 was to be submitted, the attorney advised that they should file I-140 under EB3 as the employee just had a bachelor's degree and he thought that they would get an RFE or will not probably be able to justify her qualifications for an EB2 category. At that time he also mentioned that, once the I-140 was approved, they could go ahead and submit I-485 application as though it was an EB2 case based on the approved labor. Now that I-140 is approved under EB3 category, he is going back on his words and telling that since I-140 was approved under EB3 category, they should file I-485 as though it is an EB3 application. There is a vast difference in priority dates between EB2 & EB3 categories and this is not helping the problem. Would it be okay to apply I-485 under EB2 category based on the approved labor (EB2) or should one apply I-485 under EB3 based on the approved I-140 (EB3)? Anyone who has had any experience or has any information in this regard, please advise. Or did the attorney mess up first time and he is finding an easy way to fix the problem by going the EB3 route? I sometimes wonder if these attornies really know what they are talking about or they just out there to make money at the expense of innocent people like us.
more...
qualified_trash
12-12 03:00 PM
Hi all,
This forum is full of smart people. So I want to throw my situation out there to get some advice from all of you. I am into 7th year of my H1 with by labor with PD of Sep 2002. At the rate things are moving, I am running out of patience here.
Things took an interesting turn last week, when a mid sized Software co. is willing to outsource me some of their work. Given the size of the opportunity, I will need to go to India to setup a team of 5 to 6 ppl. The co. is pretty eager and willing to offer some of the finanical guarantees I have asked for.
So my question is, should I take this opportunity and say good bye to GC? Or I should be patient as there may be a need to be in US to grow my outsourcing biz, in case it jump starts well. What would you do if you were presented this opportunity and you had the enterpreurial spirits to pull it off.
I would be eager to see what people say here.
I would do it!! If you are looking for people to help with sweat equity, send me a PM. No kidding!!
This forum is full of smart people. So I want to throw my situation out there to get some advice from all of you. I am into 7th year of my H1 with by labor with PD of Sep 2002. At the rate things are moving, I am running out of patience here.
Things took an interesting turn last week, when a mid sized Software co. is willing to outsource me some of their work. Given the size of the opportunity, I will need to go to India to setup a team of 5 to 6 ppl. The co. is pretty eager and willing to offer some of the finanical guarantees I have asked for.
So my question is, should I take this opportunity and say good bye to GC? Or I should be patient as there may be a need to be in US to grow my outsourcing biz, in case it jump starts well. What would you do if you were presented this opportunity and you had the enterpreurial spirits to pull it off.
I would be eager to see what people say here.
I would do it!! If you are looking for people to help with sweat equity, send me a PM. No kidding!!
extofu
03-07 11:06 AM
You require a new H1B stamp in your passport. If you look at your existing H1B stamp - it will have the name of your company (it is not clear from your post if this is Company A or Comapny B). Once you quit the company and leave this country, you need to have new stamp. In your case, you must have H1B stamp from Company C when you enter after you leave the country (unless you are visiting Mexico or Canada - in which case you can use automatic revalidation rule - provided you are out of the country for less than 30 days).
I am not sure what will happen if you try to reenter on a H1B with old company. The POE will have some way to find out in which company u r working.
My current H1 stamp is for company A.
Based on what you wrote, would you advise me to get the stamp of company C if I have plans to change to C eventually? I know that when I will be reentering USA, I will be on the payroll for company C.
I am not sure what will happen if you try to reenter on a H1B with old company. The POE will have some way to find out in which company u r working.
My current H1 stamp is for company A.
Based on what you wrote, would you advise me to get the stamp of company C if I have plans to change to C eventually? I know that when I will be reentering USA, I will be on the payroll for company C.
more...
skark
03-18 11:55 AM
I just noticed in I-765 that if you are applying for EAD renewal then they need you to send your current Employment authorization document! Did anyone that applied for EAD renewal send their EAD card with their application. I'm concerned because if one is working on EAD and needs to send this document 120 days prior for the renewal process and does not get the new EAD for couple months, what proof does one have on work authorization?
I dont want to apply online as I dont want to go for biometrics (FP) again for EAD!
I dont want to apply online as I dont want to go for biometrics (FP) again for EAD!
rdx0
01-10 01:18 PM
have you considered asking your client to hire you effective jan 20, but take unpaid leave until jan 25 or whenever they are ready to hire you?
That would have worked if the Client had already finished the hiring process and filed for my extension b4 my I-94 expires on Jan 20... I am yet to appear for the interview, it is just that i have some strong references (and they have multiple openings) so I have extremely good chances of getting hired ... so, no, this idea won't work :(... Jan 25th was just a imaginary date that i gave... the hiring process may take couple weeks more than that (yup, unfortunately, it's that slow) ... I was just trying to find out what are my options after Jan 20... would I be just stuck with this staffing company or could I have the Client file for my extension... if it is legally not possible then I might as well just forget about this opportunity :(
That would have worked if the Client had already finished the hiring process and filed for my extension b4 my I-94 expires on Jan 20... I am yet to appear for the interview, it is just that i have some strong references (and they have multiple openings) so I have extremely good chances of getting hired ... so, no, this idea won't work :(... Jan 25th was just a imaginary date that i gave... the hiring process may take couple weeks more than that (yup, unfortunately, it's that slow) ... I was just trying to find out what are my options after Jan 20... would I be just stuck with this staffing company or could I have the Client file for my extension... if it is legally not possible then I might as well just forget about this opportunity :(
more...
meridiani.planum
11-26 01:21 PM
Perhaps I am missing something. I thought you could get an extension beyond six years only if:
1. Your labor was pending for more than 360 days OR
2. Your I-140 was approved
I did not know that you could get an extension if:
Your labor was approved and your I-140 was still pending.
My understanding is that the USCIS came out with the I-140 premium processing only to address the above scenario. Perhaps someone who has dealt with this first hand can enlighthen us.
you can get an H1 extension if your LC is approved and I-140 is pending as long as the LC is>365 days. ie. for that 365 day rule LC has to be approved OR pending, its state does not matter. It just needs to be old enough.
USCIS is now doing premium processing of I-140 for people whose LC is <365 days old at the point their H1 runs out. THere is no other way than an approved I-140 for these people to get an extension.
1. Your labor was pending for more than 360 days OR
2. Your I-140 was approved
I did not know that you could get an extension if:
Your labor was approved and your I-140 was still pending.
My understanding is that the USCIS came out with the I-140 premium processing only to address the above scenario. Perhaps someone who has dealt with this first hand can enlighthen us.
you can get an H1 extension if your LC is approved and I-140 is pending as long as the LC is>365 days. ie. for that 365 day rule LC has to be approved OR pending, its state does not matter. It just needs to be old enough.
USCIS is now doing premium processing of I-140 for people whose LC is <365 days old at the point their H1 runs out. THere is no other way than an approved I-140 for these people to get an extension.
nozerd
02-25 03:55 PM
I am reasonably knowledgable about benefit plans like 401(k) but just wanted a second opinion in the situation I decide to move perm to India.
1) Assume I have $ 100,000 in a 401K plan.
2) I terminate and roll over the funds to an IRA.
3) If I were to withdraw the funds ASAP I would face tax at a high rate as well as the 10% withdrawl penalty as I would be under 59 yrs 6 months.
4) To minimize my taxation I withdrawl a little bit every yr under the tax bracket. Say I withdraw 10K a yr for 10 yrs. Since I have no other US income I am under the tax bracket for US and dont have to pay any taxes. I do still have to pay the 10% penalty since im under 59 1/2.
5) By doing this I eventually mange to get 90K out of the 100k I start (assuming i dont take into account market earnings)
So is this doable and good logic ? Am I right or off somewhere. Would I face any taxation in India if I bring in this money on the principal ?
Also does anyone know what kind of interest rate a risk free treasury bond or instrument would pay in India ? If I bring to India an investment of aprox Rs 50 lakhs what kind of monthly income can I earn on the money assuming a secure conservative investment.
Thanks
1) Assume I have $ 100,000 in a 401K plan.
2) I terminate and roll over the funds to an IRA.
3) If I were to withdraw the funds ASAP I would face tax at a high rate as well as the 10% withdrawl penalty as I would be under 59 yrs 6 months.
4) To minimize my taxation I withdrawl a little bit every yr under the tax bracket. Say I withdraw 10K a yr for 10 yrs. Since I have no other US income I am under the tax bracket for US and dont have to pay any taxes. I do still have to pay the 10% penalty since im under 59 1/2.
5) By doing this I eventually mange to get 90K out of the 100k I start (assuming i dont take into account market earnings)
So is this doable and good logic ? Am I right or off somewhere. Would I face any taxation in India if I bring in this money on the principal ?
Also does anyone know what kind of interest rate a risk free treasury bond or instrument would pay in India ? If I bring to India an investment of aprox Rs 50 lakhs what kind of monthly income can I earn on the money assuming a secure conservative investment.
Thanks
more...
rambo45
09-28 08:56 AM
It is possible that the employer may sue you. But since you would be finding a new job, you can always ask your new employer to give you a sign-on bonus which will be equal to or greater than the expenses demanded by your present employer.
Thats my 2 cents worth.
Thats my 2 cents worth.
justAnotherFile
07-17 08:12 PM
Thank you Emilio, for admitting the shortcomings and correcting the wrong.
more...
vikaschowdhry
06-03 07:02 AM
Regarding Visa Camp, Chicago consulate's website says:
Applications from only US Passport holders will be accepted at the Visa Camps. No other consular service except visa will be provided at the Visa Camps.
Of course, if they have incomplete information on their website - this might be untrue and they might allow renewal of passports as well.
In any case, it seems to me that the expiration date on the passport should not be a huge concern for getting the H1B approved.
Applications from only US Passport holders will be accepted at the Visa Camps. No other consular service except visa will be provided at the Visa Camps.
Of course, if they have incomplete information on their website - this might be untrue and they might allow renewal of passports as well.
In any case, it seems to me that the expiration date on the passport should not be a huge concern for getting the H1B approved.
eb2dec2005
10-24 03:08 PM
RFE and NOID come with a color sheet of paper with your details and some USCIS internal codes for your case. You can respond by yourself and put the sheet on top - this is for the mailroom to handle your case
hi Chandu,
I have used my EAD to join a perm position. I did not inform my employer about it, since he neither paid me while i was out of project,nor retained my health insurance.Although , iam not sure if he has cancelled by I140 or not.
Please let me know what documents are needed to invoke AC21.
I just know the job title on which my PERM was applied .
It was Software Engineer (Systems Software) with MS + 1 Year
And also i do have a copy of the approved I140.
Appreciate your help.
Thanks,
hi Chandu,
I have used my EAD to join a perm position. I did not inform my employer about it, since he neither paid me while i was out of project,nor retained my health insurance.Although , iam not sure if he has cancelled by I140 or not.
Please let me know what documents are needed to invoke AC21.
I just know the job title on which my PERM was applied .
It was Software Engineer (Systems Software) with MS + 1 Year
And also i do have a copy of the approved I140.
Appreciate your help.
Thanks,
more...
kshitijnt
03-04 05:05 PM
congrats buddy. Atleast some good news in a string of bad ones :)
cubedflash
01-28 10:49 AM
PJ,
Sorry for the delay in the answer. I have never heard of an import staying with your FLA file after being erased. It sounds like there is an error in Flash. I would recommend contacting our support - support@erain.com.
Here are some tips from my friend Rushvision on keeping file size low:
There are a number of different things you can do to decrease the file size of your exported SWF. Here are the some things for you to try.
Scale your objects down in the Scene Editor
Go to the Layout Page on the Properties Toolbar and decrease the scene size. You are working with vectors, so your images will scale back up very nicely once imported into Flash.
Some objects have settings that allow you to change the number of segments used to create it, such as the torus and the sphere. Decreasing the number of segments will reduce the amount of data that needs to be rendered.
Get rid of any unnecessary bevels. These add considerably to the total number of polygons that make up the objects in your scene.
In the Preview and Export Editor under the General Options, you can set the Detail Level to low.
Setting the slider farther over to Curves will usually result in a slightly smaller file size, but don't expect this one to work miracles.
Experiment with the different Fill Settings. There is no one setting that works best for every situation. Try combining outlines with some of the simpler fill settings to get the greatest amount of detail and the smallest file size. It will often be a compromise on some level.
__________________
mrush
Good luck!
-cubedflash
Sorry for the delay in the answer. I have never heard of an import staying with your FLA file after being erased. It sounds like there is an error in Flash. I would recommend contacting our support - support@erain.com.
Here are some tips from my friend Rushvision on keeping file size low:
There are a number of different things you can do to decrease the file size of your exported SWF. Here are the some things for you to try.
Scale your objects down in the Scene Editor
Go to the Layout Page on the Properties Toolbar and decrease the scene size. You are working with vectors, so your images will scale back up very nicely once imported into Flash.
Some objects have settings that allow you to change the number of segments used to create it, such as the torus and the sphere. Decreasing the number of segments will reduce the amount of data that needs to be rendered.
Get rid of any unnecessary bevels. These add considerably to the total number of polygons that make up the objects in your scene.
In the Preview and Export Editor under the General Options, you can set the Detail Level to low.
Setting the slider farther over to Curves will usually result in a slightly smaller file size, but don't expect this one to work miracles.
Experiment with the different Fill Settings. There is no one setting that works best for every situation. Try combining outlines with some of the simpler fill settings to get the greatest amount of detail and the smallest file size. It will often be a compromise on some level.
__________________
mrush
Good luck!
-cubedflash
more...
msyedy
12-13 12:03 PM
What are you saying he has no valid visa on his passportm his papers are valid. People who have a valid I-94 and like H1B - Valid i-797 can legally work in US without a valid visa on the passport.
Well getting a transit visa to france depends on the rules the French government has. Ask your travel agent.
Well getting a transit visa to france depends on the rules the French government has. Ask your travel agent.
krishna007
05-05 03:15 PM
I am similar situation (not laid off, but would like to change to employer other than one for which H-1B is approved) and spoke to a lawyer. You can apply for H-1B transfer even before Oct1st(H-1B start date). But, apply in premium processing so that your CAP-GAP benefit will not get screwed up.
perm2gc
12-22 01:49 PM
It is required of all irrespective of citizenship status to respond to a Jury summons. Not responding is considered contempt of court. The court can issue an arrest warrant for you..Always respond to the Jury summons....
What happens in someone is not at the address and he does not receive any communication regarding the jury duty.
What happens in someone is not at the address and he does not receive any communication regarding the jury duty.
Refugee_New
08-04 11:45 AM
There we go again. Now we need to create another ombudsman to make sure current ombudsman office works straight...:p
Call the BLACKHOLE aka cis office, get info about your case, and note the person's badge you spoke, time and day of your call, put it in a letter along with file 7001 and send to ombudsman's office (also mention in the letter that you filed 7001 couple of times earlier). You need to get hold of someone in ombudsman's office and be in constant touch through email or something...You should have been on the conference call past week...Next time you can participate and ask directly...
Thanks for your suggestion. I'll participate next time.
Call the BLACKHOLE aka cis office, get info about your case, and note the person's badge you spoke, time and day of your call, put it in a letter along with file 7001 and send to ombudsman's office (also mention in the letter that you filed 7001 couple of times earlier). You need to get hold of someone in ombudsman's office and be in constant touch through email or something...You should have been on the conference call past week...Next time you can participate and ask directly...
Thanks for your suggestion. I'll participate next time.
gc007
06-30 09:39 PM
Can someone tell that If USCIS says that 29 June 07 is the last date to receive applications for premium processing for I 140 . Does that mean that they shud receive the application by 29th or application shud be post-marked dated 29th in order to be considered for premium processing.
Thanks
Thanks
No comments:
Post a Comment